Female Branch Tee - Inch


Composite Push-to-Connect Advantages

This fitting was designed to meet the needs of the motion control industry where fast assembly, dis-assembly and re-assembly is important. No special tools needed for tube assembly, just insert the tubing until it bottoms.

Composite Push-to-Connect is designed to be used without a tube support, providing full flow through the tubing. The grab ring design grips the tubing securely to provide retention.

Composite Push-to-Connect external pipe threads come with a preapplied white PCTFE sealant. Positional external pipe threaded ends are featured on shapes for installion in compact areas and for precise positioning.

Specifications:
  • -4ºF to +175ºF at up to 290 psi depending on tubing being used.
Notes:
  • Vacuum applications are dependent upon temperature and type of tubing being used.
  • Tube sizes are determined by the number of sixteenths of an inch in the tube O.D.

Composite Push-to-Connect fittings were designed as an economical alternative for pneumatic applications. Ready to use, compact,one-piece fitting for use with most thermoplastic tubing.

Composite Push-to-Connect shaped fittings have a composite body with nickel plated brass componentry.

Materials
Component Material
Body Glass Reinforced Nylon 6.6
Collar Nylon
Gripping Ring Stainless Steel
D Seal Nitrile
O-Ring Nitrile
Base Nickel plated brass with Thread sealant on tapered components and captive seal on parallel threads
Female Branch Tee - Inch
Tube
O.D.
Thread Hex
C
L2 H Part
Number
inch NPT mm inch inch  
1/8 1/8 13 0.57 0.99 P57422
5/32 1/8 13 0.55 0.91 P57412
5/32 1/4 16 0.55 1.08 P57414
1/4 1/8 13 0.71 1.02 P57442
1/4 1/4 16 0.71 1.18 P57444
5/16 1/8 13 0.91 1.24 P57452
5/16 1/4 16 0.91 1.40 P57454
3/8 1/4 16 1.04 1.60 P57464
1/2 3/8 22 1.38 1.88 P57486