Male Standpipe - Inch


Composite Push-to-Connect Advantages

This fitting was designed to meet the needs of the motion control industry where fast assembly, dis-assembly and re-assembly is important. No special tools needed for tube assembly, just insert the tubing until it bottoms.

Composite Push-to-Connect is designed to be used without a tube support, providing full flow through the tubing. The grab ring design grips the tubing securely to provide retention.

Composite Push-to-Connect external pipe threads come with a preapplied white PCTFE sealant. Positional external pipe threaded ends are featured on shapes for installion in compact areas and for precise positioning.

Specifications:
  • -4ºF to +175ºF at up to 290 psi depending on tubing being used.
Notes:
  • Vacuum applications are dependent upon temperature and type of tubing being used.
  • Tube sizes are determined by the number of sixteenths of an inch in the tube O.D.

Composite Push-to-Connect fittings were designed as an economical alternative for pneumatic applications. Ready to use, compact,one-piece fitting for use with most thermoplastic tubing.

Composite Push-to-Connect shaped fittings have a composite body with nickel plated brass componentry.

Materials
Component Material
Body Glass Reinforced Nylon 6.6
Collar Nylon
Gripping Ring Stainless Steel
D Seal Nitrile
O-Ring Nitrile
Base Nickel plated brass with Thread sealant on tapered components and captive seal on parallel threads
Male Standpipe - Inch
Tube
O.D.
Thread Hex
C
H N Part
Number
inch NPT/UNF mm inch inch  
5/32 10-32 8 1.24 - P52710
5/32 1/8 11 1.02 0.57 P52712
5/32 1/4 14 1.04 0.59 P52714
1/4 1/8 11 1.18 0.61 P52742
1/4 1/4 14 1.12 0.57 P52744
5/16 1/8 11 1.16 0.43 P52752
5/16 1/4 14 1.12 0.39 P52754
3/8 1/8 15 1.75 0.65 P52762
3/8 1/4 15 1.42 0.67 P52764
3/8 3/8 17 1.42 0.61 P52766
1/2 3/8 17 1.44 0.37 P52786
1/2 1/2 21 1.46 0.39 P52788