|
Due to its extreme flexibility and tight bend radius, 85A Durometer Polyurethane Tubing is ideal for small control circuits or applications requiring repetitive flexing. Although its chemical compatibility is similar to that of 95A Durometer Polyurethane, the burst pressure of 85A Durometer Polyurethane is significantly lower, so this requirement must be carefully considered before a final tubing selection is made.
NOTE: 85A Durometer Polyurethane Fractional Inch Tubing Should Only Be Used With Barbed Fittings
|
| | |
Typical Applications
- Water & Pneumatic Lines
- Spot Welders
- Machines
- Tools
- Pneumatic Plumbing
- Pick & Place Automation
- See More Specs
|
|
|
| |
| | |
|
| 85A Durometer Polyurethane Fractional Tubing |
Tube
O.D. |
Tube
I.D. |
Wall
Thickness |
Part Number |
Min.
Bend Radius |
Weight |
Working
Pressure |
Burst Pressure |
Color Code |
| 100' |
500' |
1000' |
| inch |
inch |
inch |
Reel |
Reel |
Reel |
inch |
1000' (lbs.) |
PSI@68°F |
PSI@125°F |
PSI@68°F |
Suffix Key |
| 1/8 |
.062 |
.031 |
S322_ |
S722_ |
S622_ |
1/4 |
4.5 |
150 |
90 |
450 |
0 = Clear
1 = Black
2 = Red
3 = Blue
4 = Green
5 = Yellow
|
| 5/32 |
.093 |
.031 |
S325_ |
S725_ |
S625_ |
3/8 |
6.1 |
125 |
75 |
375 |
| 1/4 |
.125 |
.062 |
S346_ |
S746_ |
S646_ |
3/4 |
18.3 |
150 |
90 |
450 |
| Adding a Color Code suffix to the part number is required. If no Color code is selected, Natural (0) color will be supplied. Custom sizes, cut lengths, reel lengths and colors are available upon request - contact Customer Service. Please refer to the Technical Section for working pressure charts and chemical resistance. |
| | |
| |
| |
| |
| Tube Cutter |
|
| |
Part Number
|
| Tube Cutter
|
60001
|
|
Replacement Blades, 10 pack
|
60004 |
| |
- Corrosion resistant hardened steel blade assures straight, crisp cuts for optimum fitting connection
- Replacement blades can be installed in seconds using only a screwdriver
|
| |
| |
| Spiral Wrap |
|
| O.D. |
Wall
Thickess |
Part
Number |
Bundle
Range |
Length |
Color |
| inch |
inch |
|
inch |
|
|
| 1/4 |
.040 |
60020 |
3/16 - 2 |
25' (bag) |
Natural |
| 1/2 |
.062 |
60022 |
3/8 - 4 |
25' (bag) |
Natural |
| 1/2 |
.062 |
60023 |
3/8 - 4 |
25' (bag) |
Black |
| Note: Up to 1000' lengths available - please contact Customer Service |
|
| |
| Spiral Wrap is a Polyethylene Tubing that is specially cut to expand and wrap around loose wiring/tubing in order to make one neat and tangle free bundle. Spiral Wrap also act as as a protective jacket to prevent abrasion or damage from other sources in the surrounding area. The special angled cut of the tubing is rounded, allowing it to be easily and safely wrapped around a bundle of tubes or wires without cutting the contents. Spiral Wrap is available with a 1/4? outside diameter to accommodate 3/16" to 2" bundles and with a 1/2" outside diameter for 3/8" to 4" bundles. Black spiral wrap tubing is UV resistant. |
| | |
| |
| | | |
| | | Pneumatic Tubing |
| |
Contact Us
About Nycoil
Site Map
