Specifications


  • Flexibile
  • Good Chemical Resistance
  • Low Moisture Absorption
  • Superior Dimensional Stability
  • Temperature Range: -40°F to +200°F (-40°C to +93°)

The tight diameter of our Mini-Coils make them extremely flexible and ideal for use with robotics, instrumentation, small pneumatic tools, control circuits or any other application requiring either constant or intermittent motion. They include a pigtail on each end for easy fitting installation or connection to other devices. A variety of colors are available for coding purposes or to be aesthetically compatible with other equipment. Custom colors, sizes and lengths are available - please consult Customer Service.


Typical Applications
  • Pneumatic or Signal Lines
  • Pick-and-Place Automation
  • Liquid/Air Transfer
Nylon Mini-Coils
Tube
O.D.
Tube
I.D.
Wall
Thickness
Part
Number
Coil Dimensions Color Code
Overall
Length
Length
w/o Tails
Number of
Coils
Coil O.D.
"B"
Compact
Length "C"
inch inch inch   inch inch   inch inch Suffix Key
5/32 .106 .025 4112_ 36 28 8 1-1/2 1-1/4 0 = Natural
1 = Black
2 = Red
3 = Blue
5/32 .106 .025 4113_ 36 28 8 1-1/2 1-1/4
5/32 .106 .025 4115_ 60 52 12 1-1/2 1-7/8
5/32 .106 .025 4116_ 72 64 19 1-1/2 3
5/32 .106 .025 4110_ 120 112 32 1-1/2 5
1/4 .180 .035 4143_ 36 28 6 2 1-1/2
1/4 .180 .035 4145_ 60 52 10 2 2-1/2
1/4 .180 .035 4147_ 84 76 15 2 3-3/4
1/4 .180 .035 4149_ 108 100 19 2 4-3/4
5/16 .232 .040 4154_ 48 40 6 2-5/8 1-7/8
5/16 .232 .040 4156_ 72 64 10 2-5/8 3-1/8
5/16 .232 .040 4150_ 120 112 16 2-5/8 5
Supplied with "pigtails" for connection. All tails are 4" long on both ends.
Adding a Color Code suffix to the part number is required. If no Color code is selected, Natural (0) color will be supplied.
Custom sizes, cut lengths, reel lengths and colors are available upon request. Contact Customer Service.
Tube Cutter
Part Number  
Tube Cutter 60001

  • Corrosion resistant hardened steel blade assures straight, crisp cuts for optimum fitting connection
  • Replacement blades can be installed in seconds using only a screwdriver